Leaks in your house happen not only where there’s a tap or faucet, but through walls, windows, attics and basements. These kinds of leaks are known to as air leaks. As a matter of fact, having unwanted air come in into your house and wanted air exiting leads in higher monthly power bills, as you will feel the need to switch on your air conditioning unit during the hot summer months and need more heating during winter season. Air leaks cause the ordinary homeowner to spend significant amount of money every five years. In addition to that, properly insulating your house with the use of the self-spray foam insulation can simply solve this very expensive issue. 

Importance of a Spray Foam Insulation 

A spray foam insulation is actually used in a series of settings, from construction to cold storage. It is basically sprayed onto walls, giving a coat of protection from winter’s heat losses and summer’s heat as well. Do-it-yourself spray foam insulation diminishes the amount of power expended for cooling and heating, which allows more control over the temperature in your home or office. If air leaks are properly sealed with caulk before the application of the spray foam, as much as 20 percent will be possibly saved on cooling and heating costs. This is due to the reduction of air movement.  

Allow the Chemicals to Prepare 

Successfully using the foam needs dispensing a stream of chemicals found in all tanks which are included in the system. While this chemical in one tank is comparable to a texture same with molasses, the other tank contains the chemical with a milk-like texture. By warming up the first tank, you can obtain a texture same as to that of the second, thus allowing an even flow of the two chemicals. Although the chemicals in your DIY spray foam insulation usually takes some time to cool, its temperature should be adjusted prior to using. 

You are probably wondering exactly how you can warm up your DIY spray foam. The easiest way to do this job is to put your tanks in a warm place and use electric blanket to speed up the process. Another method to warm your DIY spray foam is to make an exceptionally insulated box, installing a light bulb at the center of the tanks. Keep in mind to maintain the core temperature greater than 70 degrees Fahrenheit. Neglecting to do this step can turn your self-spray foam hard to use during winter months. 

Once the spray foam has been warmed up to perfection, it is already time to use it. A gun hose applicator is needed for any DIY spray foam insulation project. Use a gun to test on a small portion or surface prior to insulating the whole area. This will help you accustom yourself with the foam. Furthermore, you will also achieve a better knowledge of how much must be applied in a single room and what techniques work perfectly for you. You can also learn more tips and techniques by contacting a professional Fort Mill spray foam insulation service provider.